Heating cables for a safer heat pump operation!

Reliably prevent frost damage and total loss on airconditioning systems.

  • Frost protection for heat pumps and air conditioners
  • Prevents failure
  • Built in thermostat
  • Durable and resistant
  • 100% Made in Germany

Can we help?
+49 7135 98980

Why heat air conditioner and heat pump?

In each heat pump or air conditioning system moisture is produced, primarily by condensation. When the outside temperature drops, it may happen that this moisture cannot drain because the drains or drain pans freeze. The result: A measurable impairment of heat pumps or air conditioning, higher energy costs or even damage. 

Avoid failure of heat pumps in winter!

With Hemstedt heating cables you can prevent such adverse effects and ensure reliable antifreeze for your heat pump. It is precisely in the winter when a decrease in power or even a total failure is fatal - and expensive. It is no different in air conditioning systems, which have to work reliable even in winter in many applications.

Energy-saving control for hating cables

The drains of a heat pump or air conditioning system must not be heated all year round as it is necessary with the oil preheaters for compressors. Therefore a thermostat is integrated in the cable. So you can be sure that the heater only is in operation when it is really needed.

Our products also run on fuel cell / hydrogen technology!
Made in Germany - since 1974
  • Underfloor heating is harmful to your health? Wrong!

    This prejudice is from the 1960ies and no longer correct.

    Quite the contrary!

    Here You get to know why!

  • Electric underfloor heating is expensive? Wrong!

    A comparison in terms of acquisition and consumption gives clarity.

  • Electric underfloor heating

    Pros and cons underfloor heating – Does it make sense?

  • Creative freedom and feel good architecture thanks to underfloor heating

    „Heat coming up from beneath as naturally as heat rises - there is no other ideal heat“ (Frank Lloyd Wright)

Specifications HEM-SYSTEM DRAIN HEATING, Item no. 59040

Protection class II
Insulation and casing Silicone
Diameter ca. 6.3 mm
Output 50 W/m
Voltage 230 V
End Heat shrink tube and hotmelt adhesive
Thermostat +5°C on/+15°C off
Nominal limit temperature +135°C

Heating cable HEM-SYSTEM DRAIN HEATING, 50W/m, Item no. 59040

Item no. Length m Output W
59040-1.00 1.00 70
59040-1.50 1.50 90
59040-2.00 2.00 100
59040-3.00 3.00 150
59040-4.00 4.00 200
59040-5.00 5.00 250
59040-6.00 6.00 300