More safety in winter through heated driveways, footpaths and even lawns thanks to outdoor heating systems!
- No more shoveling snow
- No black ice
- Safety for steep paths and driveways
- For any type of ground
- Extremely durable
- Available as yard goods or heating mats
- Output: 300 W/m²
- Suited for landing pads and oil rigs!
Can we help?
+49 7135 98980
Don't worry about ice and snow
You may know this - you step outside in winter and start slipping. Black ice and freezing wetness are often invisible and can have dangerous consequences, especially in terms of liability if, for example, the mailman slips. With an outdoor heating system, you don't need to worry about the risks of black ice. You can even heat steep driveways, thus making sure they can be used safely all year round.
Hemstedt expertise for any area!
For over 40 years Hemstedt has been developing outdoor heating systems for different fields, such as bridges in cold regions or landing pads and hospital driveways. Those are areas where an outdoor heating system has to work perfectly at any time. In terms of reliability, electric outdoor heating systems are superior to other systems in every way.
Simple laying of the outdoor heating mats into any ground
Outdoor heating mats are available in different designs to match the respective ground. That way, outdoor heating mats can be installed, for example, in sand or beneath cobblestones, but also into concrete or screed. The robust Hemstedt outdoor heating is available as both heating mats or pre-assembled bulk stock.
Needs-based control of the outdoor heating system
Since permanent heating is not always necessary or sensible, the outdoor heating system can be controlled based on the user needs, for example via a timer or depending on the temperature with ice and snow alarms. That way, an optimal balance between energy use and protection from ice and snow can be achieved.
Technical data D-COLD<sup>®</sup> BHF-IM-S HEATING MAT Item no. 31851
|Nominal voltage||230 Volt|
|Output||ca. 300 W/m²|
|Cold connection cable||1 x 7.00 m [1.00 mm²]|
|Min. installation cable||5.°C|
|Max. temperature outer sheath [colour red]]||65°C|
|Smallest bending radius||5 x dA|
|Resistance tolerance||-5 %/+10 %|
|Cold/warm splice||sleeveless, without shrink technology|
|Diameter||approx. 7.00 mm|
|Supplied with||0.50 m|
|Calculated width||0.60 m|