Two-circuit controllers - for energy efficient use of all two-circuit heating mats and cables.

  • Well-arranged display for operation mode
  • Frost protection function
  • Floor temperature limitation
  • One- or two-circuit mode
  • Ideal for low-energy housing and quick heating

Can we help?
+49 7135 98980

Climate protection starts with the right controller

The Hemstedt-two-circuit controller is specifically designed for heating mats or cables with two independet heating circuits. The greatest advantage: With a simple push of a button, the room can quickly be heated to the ideal temperature, which will then be kept steady at half power. This saves long and often unnecessary preheating time in rooms that aren't being used that often and helps saving energy and resources.

Well-arranged controls

A point scale adjusting dial for temperature, a slide switch for the heating mode. More isn't needed to efficiently and optimally regulate room temperature, no matter if it's the bathroom or in living rooms of low-energy houses. The Hemstedt two-circuit controller always displays how many heating circuits are in use and offers a "frost protection circuit", so you can just turn the heating system off while going on vacation without worrying.

Simple installation

The Hemstedt two-circuit controller fits into every wall socket and can be retrofitted without problems. The design is simple and functional, so the control can be combined with any common light switch sets.

Made in Germany - since 1974
  • Underfloor heating is harmful to your health? Wrong!

    This prejudice is from the 1960ies and no longer correct.

    Quite the contrary!

    Here You get to know why!

  • Electric underfloor heating is expensive? Wrong!

    A comparison in terms of acquisition and consumption gives clarity.

  • Electric underfloor heating

    Pros and cons underfloor heating – Does it make sense?

  • Creative freedom and feel good architecture thanks to underfloor heating

    „Heat coming up from beneath as naturally as heat rises - there is no other ideal heat“ (Frank Lloyd Wright)

Specifications TWO-CIRCUIT CONTROLLER Item no. 93085

Rated operating voltage AC 230 V ±10 %, 50 Hz
Rated load 13 A at AC 230 V; two-pin with separate relays, max. 10 A each
Switching hysteresis 1 ± 0,5 K, referring to the bottom temperature
Bottom temperature operation adjustable from 30°C to 40°C in 5 K steps
Maximum setting area of the darget dial 10°C..40°C
Bottom sensor monitoring for short circuit and interruption
Installation in switch sockets according to DIN 49073, concealed
Protection class II, at corresponding installation
Protection type IP20, use at room temperature
Sensor 2 m